🎓 CMA Final Exam Master Bank
✓ Answers Beside Each Question
📊 Tabular Quick-Revision
ICMAI Tested
CMA Final Rapid Revision — Fill in the Blanks Table
Master essential legal sections, audit forms, tax limits, and financial ratios. Converted from official ICMAI MCQs into a fast-recall Tabular Form with answers placed directly beside each question.
Select CMA Final Paper
P13 • Group 3
Corporate and Economic Laws
P14 • Group 3
Strategic Financial Management
P15 • Group 3
Direct Tax Laws & International Taxation
P16 • Group 3
Strategic Cost Management
P17 • Group 4
Cost and Management Audit
P18 • Group 4
Corporate Financial Reporting
P19 • Group 4
Indirect Tax Laws and Practice
P20C • Group 4 (Elective)
Entrepreneurship and Startup
📊 P16: Strategic Cost Management Group 3
Structured table with sentence blanks and official answers in the adjacent column.
| # | Fill in the Blanks Question | Official Answer (Beside) |
|---|---|---|
| #1 | Which of the following is not a primary activity of Value Chain: _______. |
✓ Official Answer
Infrastructure
👁️ Click to Reveal
|
| #2 | Which of the following is not a secondary activity of Value Chain: _______. |
✓ Official Answer
Service
👁️ Click to Reveal
|
| #3 | Which of the following is not a term normally used in value analysis: _______. |
✓ Official Answer
Resale value
👁️ Click to Reveal
|
| #4 | A company has forecast sales and cost of goods sold for the coming year as Rs. 25 lakhs and Rs. 18 lakhs respectively. The inventory turnover has been taken as 9 times per year. In case the inventory turnover increases to 12 times and the short-term interest rate on working capital is taken as 10%, what will be the saving in cost: _______. |
✓ Official Answer
Rs. 5,000
👁️ Click to Reveal
|
| #5 | Which of the following important pillars of Strategic Cost Management determines the company’s comparative position in the industry in terms of performance: _______. |
✓ Official Answer
Strategic Positioning Analysis
👁️ Click to Reveal
|
| #6 | is defined as the real and permanent reduction in the unit _______ costs of goods manufactured or services rendered without impairing their suitability for the use intended. |
✓ Official Answer
Cost reduction
👁️ Click to Reveal
|
| #7 | There are three core areas to consider when developing the supply chain strategy and business case. These are is _______. |
✓ Official Answer
People, Process & Systems
👁️ Click to Reveal
|
| #8 | TQM stands for is _______. |
✓ Official Answer
Total Quality Management
👁️ Click to Reveal
|
| #9 | Four Ps of Total Quality Management is _______. |
✓ Official Answer
People, Process, Problem & Preparation
👁️ Click to Reveal
|
| #10 | PRAISE stands for is _______. |
✓ Official Answer
Problem Identification, Ranking, Analysis, Innovation, Solution & Evaluation
👁️ Click to Reveal
|
| #11 | DMIADV is a methodology associated with is _______. |
✓ Official Answer
Six Sigma
👁️ Click to Reveal
|
| #12 | Pareto analysis recognizes is _______. |
✓ Official Answer
80:20 Rule
👁️ Click to Reveal
|
| #13 | Cost of Rework is a cost related to is _______. |
✓ Official Answer
Internal failure
👁️ Click to Reveal
|
| #14 | The cost incurred to ensure that failures do not happen is _______. |
✓ Official Answer
Prevention cost
👁️ Click to Reveal
|
| #15 | The break-even point of a manufacturing company is Rs.1,60,000. Fixed cost is Rs.48,000. Variable cost is Rs.12 per unit. The PV ratio will be is _______. |
✓ Official Answer
30%
👁️ Click to Reveal
|
| #16 | The higher the actual hours worked is _______. |
✓ Official Answer
The higher the capacity utilization ratio
👁️ Click to Reveal
|
| #17 | XYZ Ltd. has the following alternative planned activity levels: Total cost (Rs.): 1,00,000 (Level E) 1,50,000 (Level F) 2,00,000 (Level G) No. of units produced: 5,000 (Level E) 10,000 (Level F) 15,000 (Level G) If fixed overhead remains constant, then fixed overhead cost per unit at Level E is is _______. |
✓ Official Answer
Rs. 10
👁️ Click to Reveal
|
| #18 | T Ltd. produces and sells a product. The company expects the following revenues and costs in 2024: Revenues (400 sets sold @ Rs.600 per product) = Rs. 2,40,000 Variable costs = Rs. 1,60,000 Fixed costs = Rs. 50,000 What amount of sales must T Ltd. have to earn a target net income of Rs.63,000 if they have a tax rate of 30%: _______. |
✓ Official Answer
Rs. 4,20,000
👁️ Click to Reveal
|
| #19 | Excel Products Ltd. manufactures four products e.g. Product E, Product F, Product G and Product H using same raw materials. The input requirements for Products E, F, G and H are 1kg, 2kgs, 5kgs and 7kgs, respectively. Product-wise Selling Price and Variable Cost data are given hereunder: Selling Price of Products E, F, G & H are Rs.100, Rs.150, Rs.200 & Rs.300 respectively and variable costs are Rs.50, Rs.70, Rs.100 & Rs.125 respectively. Assuming raw material availability is a limiting factor, the correct ranking of the products would be is _______. |
✓ Official Answer
E, F, H & G
👁️ Click to Reveal
|
| #20 | A company has a breakeven point when sales are Rs. 3,20,000 and variable cost at that level of sales are Rs. 2,00,000. How much would p/v ratio increase or decrease if variable expenses are dropped by Rs.30,000: _______. |
✓ Official Answer
Increase by 9.375%
👁️ Click to Reveal
|
| #21 | The Tech Company has fixed costs of Rs.400,000 and variable costs are 75% of the selling price. To realize profits of Rs.100,000 from sales of 5,00,000 units, the selling price per unit is _______. |
✓ Official Answer
must be Rs.4.00
👁️ Click to Reveal
|
| #22 | A company makes components and sells internally to its subsidiary and also to external market. The external market price is Rs.24 per component, which gives a contribution of 40% of sales. For external sales, variable costs include Rs.1.50 per unit for distribution costs. This is, however not incurred in internal sales. There are no capacity constraints. To maximize company profit, the transfer price to subsidiary should be is _______. |
✓ Official Answer
Rs. 12.90
👁️ Click to Reveal
|
| #23 | H Group has two divisions, Division P and Division Q. Division P manufactures an item that is transferred to Division Q. The item has no external market and 6000 units produced are transferred internally each year. The costs of each division: Variable Cost: Rs.100 per unit & Rs.120 per unit for Division P & Q respectively. Fixed cost each year: Rs.1,20,000 & Rs.90,000 for Division P & Q respectively. Head Office management decided that a transfer price should be set that provides a profit of Rs. 30,000 to Division P. What should be the transfer price per unit: _______. |
✓ Official Answer
Rs. 125
👁️ Click to Reveal
|
| #24 | A particular job required 800 kgs of material – P. 500 kgs. of the particular material is currently in stock. The original price of the material – P was Rs.300 but current resale value of the same has been determined as Rs.200. If the current replacement price of the material – P is Rs.0.80 per kg., the relevant cost of the material – P required for the job would be is _______. |
✓ Official Answer
Rs. 440
👁️ Click to Reveal
|
| #25 | What is the opportunity cost of making a component part in a factory given no alternative use of the capacity: _______. |
✓ Official Answer
Zero
👁️ Click to Reveal
|
| #26 | If project A has a net present value (NPV) of Rs.30,00,000 and project B has an NPV of Rs.50,00,000, what is the opportunity cost if project B is selected: _______. |
✓ Official Answer
Rs. 30,00,000
👁️ Click to Reveal
|
| #27 | X Ltd. has 1000 units of an obsolete item which are carried in inventory at the original price of Rs.50,000. If these items are reworked for Rs. 20,000, they can be sold for Rs. 36,000. Alternatively, they can be sold as a scrap for Rs. 6,000 in the market. In a decision model used to analyse the reworking proposal, the opportunity cost should be taken as is _______. |
✓ Official Answer
Rs. 6,000
👁️ Click to Reveal
|
| #28 | The shadow price of skilled labour for SD Ltd. is currently Rs. 10 per hour. What does this mean: _______. |
✓ Official Answer
Contribution will be increased by Rs. 10 per hour for each extra hour of skilled labour that can be obtained.
👁️ Click to Reveal
|
| #29 | A factory can make only one of the three products X, Y or Z in a given production period. The selling price per unit of Product X, Y & Z is Rs.1,500, Rs.1,800 & Rs.2,000 respectively and variable cost per unit is Rs.700, Rs.950 & Rs.1,000 respectively. Assume that there is no constraint on resource utilization or demand and similar resources are consumed by X,Y and Z. The opportunity cost of making one unit of Z is is _______. |
✓ Official Answer
Rs. 850
👁️ Click to Reveal
|
| #30 | A company has 2000 units of an obsolete item which are carried in inventory at the original purchase price of Rs. 30,000. If these items are reworked for Rs.10,000, they can be sold for Rs. 18,000. Alternatively, they can be sold as scrap for Rs.3,000 in the market. In a decision model used to analyse the reworking proposal, the opportunity cost should be taken as is _______. |
✓ Official Answer
Rs. 3,000
👁️ Click to Reveal
|
| #31 | TM Company can make 100 units of a necessary component part with the following costs: Direct Materials - Rs.60,000 Direct Labour - Rs.10,000 Variable Overhead - Rs.30,000 Fixed Overhead - Rs.20,000 TM Company can purchase the component externally for Rs.1,10,000 and only Rs.5,000 of the fixed costs can be avoided, what is the correct make-or- buy decision: _______. |
✓ Official Answer
Make and Save Rs.5000
👁️ Click to Reveal
|
| #32 | AP Products sells product A at a selling price of Rs.40 per unit. AP’s cost per unit based on the full capacity of 5,00,000 units is as follows Direct Materials - Rs.6 Direct Labour - Rs.3 Indirect Manufacturing Expense 60% of which is fixed - Rs.10 A one-time only special order offering to buy 50,000 units was received from an overseas distributor. The only other costs that would be incurred on this order would be Rs. 4 per unit for shipping. AP has sufficient existing capacity to manufacture the additional units. In negotiating a price for the special order, AP should consider that the minimum selling price per unit should be is _______. |
✓ Official Answer
Rs. 17
👁️ Click to Reveal
|
| #33 | In cost plus pricing, the markup consist of is _______. |
✓ Official Answer
Desired ROI
👁️ Click to Reveal
|
| #34 | MN paid Rs. 5,30,000 for a machine used to powder wheat. The machine can be sold for Rs. 1,30,000. The sale value of wheat is Rs. 8,00,000 and its variable cost is Rs. 4,00,000. The opportunity cost of producing wheat flour is is _______. |
✓ Official Answer
Rs.1,30,000
👁️ Click to Reveal
|
| #35 | A Ltd. Plans to introduce a new product and issuing the target cost approach. Projected sales revenue is Rs. 90,00,000 (Rs. 45 per unit) and target costs are Rs. 64,00,000. What is the desired profit per unit: _______. |
✓ Official Answer
Rs. 13
👁️ Click to Reveal
|
| #36 | Target costing is the answer to is _______. |
✓ Official Answer
Market driven prices
👁️ Click to Reveal
|
| #37 | The product of XYZ company is sold at a fixed price of Rs. 1,500 per unit. As per company’s estimate, 500 units of the product are expected to be sold in the coming year. If the value of investments of the company is Rs. 15 lakhs and it has a target ROI of 15%, the target cost would be is _______. |
✓ Official Answer
Rs. 1050
👁️ Click to Reveal
|
| #38 | A company has the capacity of producing 80000 units and presently sells 20000 units at Rs. 100 each. The demand is sensitive to selling price and it has been observed that with every reduction of Rs. 10 in selling price the demand is doubled. What should be the target cost if the demand is doubled at full capacity and profit margin on sale is taken at 25%: _______. |
✓ Official Answer
Rs.60
👁️ Click to Reveal
|
| #39 | 120 units of semi-conductors are required to be sold to earn a profit of Rs.1,00,000 in a monopoly market. The fixed cost for the period is Rs.80,000. The contribution in the monopoly market is as high as 3/4th of its variable cost. Determine the target selling price per unit: _______. |
✓ Official Answer
Rs.3500
👁️ Click to Reveal
|
| #40 | Cost Driver is is _______. |
✓ Official Answer
Elements that would cause a change in the cost activity.
👁️ Click to Reveal
|
| #41 | ABC Management is _______. |
✓ Official Answer
Accurately identifies sources of profit and loss / Assigns costs using measure of service consumed / Recognizes the casual relationship of cost drivers to activities (All of the above)
👁️ Click to Reveal
|
| #42 | Process of Cost allocation under Activity Based Costing is is _______. |
✓ Official Answer
Activities → Cost of Activities → Cost Driver → Cost allocated to cost objects
👁️ Click to Reveal
|
| #43 | P operates an activity-based costing (ABC) system to attribute its overhead costs to cost objects. In its budget for the year ending 31st March 2022, the company expected to place a total of 2,895 purchase orders at a total cost of Rs. 1,10,010. This activity and its related costs were budgeted to occur at a constant rate throughout the budget year, which is divided into 13 four- week periods. During the four-week period ended 30 June 2021, a total of 210 purchase orders were placed at a cost of Rs. 7,650. The over- recovery of these costs for the four-week period was is _______. |
✓ Official Answer
Rs. 330
👁️ Click to Reveal
|
| #44 | At KL Company, cost of personnel department has always been charged to production department based upon number of employees. Recently, opinion gathered from the department managers indicate that number of new hires might be better predictor of personnel cost, Total personnel department cost are Rs. 2,00,000. Department A B C Number of employees 30 270 100 The number of new hires 8 12 5 If number of new hires is considered the cost driver, what amount of cost will be allocated to Department A: _______. |
✓ Official Answer
Rs. 64,000
👁️ Click to Reveal
|
| #45 | Which of the following is not suitable for a JIT production system: _______. |
✓ Official Answer
Batch production
👁️ Click to Reveal
|
| #46 | JIT relates to is _______. |
✓ Official Answer
Inventory and product handling
👁️ Click to Reveal
|
| #47 | Glasso, a manufacturer of large windows, is experiencing a bottleneck in its plant. Setup time at one of its workstations has been identified as the culprit. A manager has proposed a plan to reduce setup time at a cost of Rs. 7,20,000. The change will result in 800 additional windows. The selling price per window is Rs. 18,000, direct labour costs are Rs. 3000 per window, and the cost of direct materials is Rs. 7,000 per window. Assume all units produced can be sold. The change will result in an increase in the throughput contribution of ………………: _______. |
✓ Official Answer
Rs. 88,00,000
👁️ Click to Reveal
|
| #48 | Cost per unit under throughput accounting and marginal costing are mainly different because is _______. |
✓ Official Answer
Direct labour is considered fixed in throughput accounting
👁️ Click to Reveal
|
| #49 | Ankit Ltd., operates throughput accounting system. The details of product A per unit are as under: Selling Price: Rs. 75 Material Cost: Rs. 30 Conversion Cost: Rs. 20 Time to bottleneck resources: 10 minutes What is the throughput contribution per bottleneck resource per hour: _______. |
✓ Official Answer
Rs. 270
👁️ Click to Reveal
|
| #50 | Producing more non-bottleneck output is _______. |
✓ Official Answer
Creates more inventory, but does not increase throughput contribution
👁️ Click to Reveal
|
| #51 | Twin Ltd. uses JIT and back flush accounting. It does not use a raw material stock control account. During September 2023, 10000 units were produced and sold. The standard cost per unit is Rs. 150 which includes materials of Rs. 60. During September 2023, Rs. 9,90,000 of conversion costs were incurred. The debit balance in cost of goods sold account for September 2023 is is _______. |
✓ Official Answer
Rs. 15,90,000
👁️ Click to Reveal
|
| #52 | The companies that would benefit from back-flush costing include companies is _______. |
✓ Official Answer
Which have fast manufacturing lead time
👁️ Click to Reveal
|
| #53 | Bench marking is is _______. |
✓ Official Answer
A continuous process / The practice of setting targets using external information / Method to provide performance assessment (All of the above)
👁️ Click to Reveal
|
| #54 | Kanban Japanese System under JIT approach ensures that is _______. |
✓ Official Answer
Continuous supply of inventory or product
👁️ Click to Reveal
|
| #55 | The information relating to the direct material cost of a company is as follows: Standard price per unit: Rs. 7.20 Actual quantity purchased in units: 1600 Standard quantity allowed for actual production in units: 1450 Material price variance on purchase (Favourable): Rs. 480 What is the actual purchase price per unit: _______. |
✓ Official Answer
Rs. 6.90
👁️ Click to Reveal
|
| #56 | In a factory where standard costing system is followed, the production department consumed 1100 kgs of a material @ Rs. 8 per kg for product X resulting in material price variance of Rs. 2200 (Fav) and material usage variance of Rs. 1000 (Adv). What is the standard material cost of actual production of product X: _______. |
✓ Official Answer
10,000
👁️ Click to Reveal
|
| #57 | AB Ltd. uses standard cost system. The following information pertains to direct labour for Product X for the month of March, 2024: Standard rate per hour = Rs. 8 Actual rate per hour = Rs. 8.40 Standard hours allowed for actual production = 2000 hours Labour Efficiency variance = Rs. 1,600 (Adverse) What were the actual hours worked: _______. |
✓ Official Answer
2,200
👁️ Click to Reveal
|
| #58 | Aderholt uses activity-based costing to allocate its overheads. The budgeted cost/ expected for the Supervisor cost pool was: Budgeted units: 5,000 Number of employees: 75 Budgeted Cost: Rs. 7,500 The actual costs incurred were: Actual Units: 5,500 Actual Employees: 77 Actual cost: Rs. 8,085 What was the total variance for the pool: _______. |
✓ Official Answer
Rs. 165 Favourable
👁️ Click to Reveal
|
| #59 | The following figures are extracted from the books of a company: Budgeted O/H Rs. 10,000 (Fixed Rs. 6,000, Variable Rs. 4,000) Budgeted Hours 2000 Actual O/H Rs. 10,400 (Fixed Rs. 6,100, Variable Rs. 4,300) Actual Hours 2100 Variable O/H cost variance and Fixed O/H cost variance will be is _______. |
✓ Official Answer
100 (A) and 200 (F)
👁️ Click to Reveal
|
| #60 | A company uses standard absorbing costing. The following information is recorded by the company for October: Budgeted - Output and sales: 8,700 Selling Price per unit: Rs. 26 Variable Cost per unit: Rs.10 Total Fixed Overheads: Rs. 34800 Actuals - Output and sales: 8,200 Selling Price per unit: Rs.31 Variable Cost per unit: Rs.10 Total Fixed Overheads: Rs. 37000 The sales price variance for October was is _______. |
✓ Official Answer
41,000 (F)
👁️ Click to Reveal
|
| #61 | Which of the following may be the cause of Material Price Variance: _______. |
✓ Official Answer
Change in quantity of purchase or uneconomical size of purchase order / Failure to take advantage of off- season price or failure to purchase when price is cheaper / Change in basic purchase price of material (All of the above)
👁️ Click to Reveal
|
| #62 | Variance analysis involves breaking down and analysing the total variance to explain is _______. |
✓ Official Answer
How much of the variance is caused by using the resources that are different from the standards, i.e., the quantity variance / How much of the variance is caused by using the cost of the resources being different from the standards, i.e., the rate variance (All of the above)
👁️ Click to Reveal
|
| #63 | standard costing system consists of the following key elements is _______. |
✓ Official Answer
Setting standards for each of the operations / Comparing the actual performance with the standard performance / Analyzing and reporting variances arising from the difference between actual and standard performance (All of the above)
👁️ Click to Reveal
|
| #64 | Which of the following statements is correct: _______. |
✓ Official Answer
Standard costing facilitates the integration of accounts so that reconciliation between cost accounts and financial accounts may be eliminated / Standard costs are planned costs determined on a scientific basis and they are based upon certain assumed conditions of efficiency and other factors / Standard costing is defined as the preparation and use of standard cost, their comparison with actual cost and the measurement and analysis of variances to their cause and points of incidence (All of the above)
👁️ Click to Reveal
|
| #65 | Which of the following statements is true: _______. |
✓ Official Answer
If the actual cost is more than the standard, we call it adverse variance and if the difference is less than the standard, we call it favourable variance. OR In case of sales and profit, if the standard is more than actual, it is adverse variance and if the standard is less than the actual, it is favourable variance
👁️ Click to Reveal
|
| #66 | Standard cost and budgeted cost are is _______. |
✓ Official Answer
Interrelated but not interdependent
👁️ Click to Reveal
|
| #67 | Efficiency Ratio is is _______. |
✓ Official Answer
Standard hours ÷ Actual hours × 100
👁️ Click to Reveal
|
| #68 | Uniform Costing may not be successfully applied in the following case is _______. |
✓ Official Answer
In different branches of the same company, each branch making a different product using a unique process
👁️ Click to Reveal
|
| #69 | A constraint in an L.P. Model restricts is _______. |
✓ Official Answer
Value of the Objective Function / Values of the Decision Variables / Use of the available resources (All of the above)
👁️ Click to Reveal
|
| #70 | A feasible solution of LPP –: _______. |
✓ Official Answer
Must satisfy all the constraints simultaneously.
👁️ Click to Reveal
|
| #71 | The Objective Function of a LPP is Z = 3x₁+ 2x₂ . If x₁= 10 and x₂= 5 then the value of Z is –: _______. |
✓ Official Answer
40
👁️ Click to Reveal
|
| #72 | Multiple solution exist in a Linear Programming problem when –: _______. |
✓ Official Answer
Objective Function is parallel to one of the constraints
👁️ Click to Reveal
|
| #73 | The linear function of the variables which is to be optimized is called –: _______. |
✓ Official Answer
Objective Function
👁️ Click to Reveal
|
| #74 | If the value of the Objective Function can be increased or decreased indefinitely then the solution is called –: _______. |
✓ Official Answer
Unbounded
👁️ Click to Reveal
|
| #75 | The best use of Linear Programming is to find the optimal use of –: _______. |
✓ Official Answer
Manpower / Material / Money (All of the above)
👁️ Click to Reveal
|
| #76 | Which of the following is assumption of Linear Programming Model: _______. |
✓ Official Answer
Divisibility / Proportionality / Additivity (All of the above)
👁️ Click to Reveal
|
| #77 | Which of the following considers difference between least cost and the cost just before least for each row and column while finding Basic Feasible Solution in Transportation: _______. |
✓ Official Answer
Vogel’s Approximation Method
👁️ Click to Reveal
|
| #78 | When the total allocation of a Transportation Problem match with supply and demand values, the solution is –: _______. |
✓ Official Answer
Feasible
👁️ Click to Reveal
|
| #79 | The solution to a Transportation Problem with ‘m’ sources and ‘n’ destinations is feasible if the number of cell allocations are –: _______. |
✓ Official Answer
m + n – 1
👁️ Click to Reveal
|
| #80 | To resolve Degeneracy in the solution of a Transportation Problem an infinitely small allocation is made to the solution already obtained. This allocation is known as –: _______. |
✓ Official Answer
Dummy / Epsilon / ε – the Greek letter (All of the above)
👁️ Click to Reveal
|
| #81 | Which of the following is not correct with respect to Transportation as a tool of Quantitative Technique: _______. |
✓ Official Answer
No Transportation problem can be given with supply ≠ demand.
👁️ Click to Reveal
|
| #82 | Which of the following method is used to test optimality of a solution in Transportation: _______. |
✓ Official Answer
Modified Distribution
👁️ Click to Reveal
|
| #83 | In a solution of Transportation problem, empty cells are called –: _______. |
✓ Official Answer
Unoccupied cells / Unallocated cells / Empty cells (All of the above)
👁️ Click to Reveal
|
| #84 | The Transportation Problem deals with the transportation of –: _______. |
✓ Official Answer
Single product from several sources to several destinations.
👁️ Click to Reveal
|
| #85 | Which of the following methods is used to solve the Assignment problems: _______. |
✓ Official Answer
Hungarian Method
👁️ Click to Reveal
|
| #86 | Assignment of work to men and machines is known as is _______. |
✓ Official Answer
Loading
👁️ Click to Reveal
|
| #87 | In an Assignment matrix of size (5 × 5), the total number of decision variables in the objective function is –: _______. |
✓ Official Answer
25
👁️ Click to Reveal
|
| #88 | An Assignment problem is solved to minimise the total time required to complete three jobs on three different machines such that each job is processed by exactly one machine and each machine processes exactly one job. The minimum total processing time is found to be 480 minutes. After a few days of operation, there has been a change in the design of the second job. Due to this, the processing time of the second job is increased by 15 minutes in either of the machines. The revised minimum total processing time will be –: _______. |
✓ Official Answer
495 minutes
👁️ Click to Reveal
|
| #89 | Assignment problem can be considered as a particular case of -: _______. |
✓ Official Answer
Transportation problem
👁️ Click to Reveal
|
| #90 | Dummy row or column is added in an assignment problem –: _______. |
✓ Official Answer
To balance total activities and total resources
👁️ Click to Reveal
|
| #91 | While solving an assignment problem, an activity is assigned to a resource with zero opportunity cost because objective is to –: _______. |
✓ Official Answer
Minimise total cost of assignment
👁️ Click to Reveal
|
| #92 | In an assignment problem –: _______. |
✓ Official Answer
Only one activity be assigned to each resource
👁️ Click to Reveal
|
| #93 | An assignment problem can be viewed as a special case of transportation problem in which the capacity from each source is and the demand at _______ each destination is . |
✓ Official Answer
One, one
👁️ Click to Reveal
|
| #94 | _______ In marking assignments which of the following should be preferred? |
✓ Official Answer
Only row / column having single zero
👁️ Click to Reveal
|
| #95 | The assignment matrix is always a: _______. |
✓ Official Answer
Square matrix
👁️ Click to Reveal
|
| #96 | _______ Maximisation assignment problem is transformed into a minimisation problem by |
✓ Official Answer
Subtracting each entry of the table from the maximum value of the table
👁️ Click to Reveal
|
| #97 | _______ In the Hungarian Method of solving Assignment problem, the row reduction is obtained by |
✓ Official Answer
Subtracting the smallest element from all other elements of the row
👁️ Click to Reveal
|
| #98 | The horizontal and vertical lines drawn to cover all zeros of the total opportunity matrix for an optimal solution must be –: _______. |
✓ Official Answer
Equal to the Order of the matrix
👁️ Click to Reveal
|
| #99 | The similarity between Assignment Problem and Transportation Problem is –: _______. |
✓ Official Answer
Both have objective function and non- negativity constraints
👁️ Click to Reveal
|
| #100 | When we try to solve the Assignment problem by Transportation algorithm the following difficulty arises: _______. |
✓ Official Answer
The problem degenerates and we have to use epsilon to solve degeneracy
👁️ Click to Reveal
|
| #101 | The following character dictates that the Assignment matrix is a square one is _______. |
✓ Official Answer
The allocations in Assignment problem are one to one
👁️ Click to Reveal
|
| #102 | An Assignment problem can be solved by –: _______. |
✓ Official Answer
Simplex method OR Transportation method
👁️ Click to Reveal
|
| #103 | If there are n jobs and n workers, there would be –: _______. |
✓ Official Answer
n! solutions
👁️ Click to Reveal
|
| #104 | The Assignment problem is _______. |
✓ Official Answer
Requires that only one activity be assigned to each resource / Is a special case of Transportation problem / Can be used to maximise the resources (All of the above)
👁️ Click to Reveal
|
| #105 | To proceed with the MODI algorithm for solving an assignment problem, the number of dummy allocations need to be added are –: _______. |
✓ Official Answer
n -1
👁️ Click to Reveal
|
| #106 | The procedure used to solve Assignment problems wherein one reduces the original assignment costs to a table of opportunity costs is called _______. |
✓ Official Answer
Matrix Reduction
👁️ Click to Reveal
|
| #107 | _______ When a maximisation assignment problem is converted to minimisation problem, the resultant matrix is called: |
✓ Official Answer
Regret matrix
👁️ Click to Reveal
|
| #108 | Two person zero sum game means that is _______. |
✓ Official Answer
The sum of losses of one player is equal to the sum of the gains of the other
👁️ Click to Reveal
|
| #109 | Game theory models are classified by the is _______. |
✓ Official Answer
Number of players / Sum of all payoffs / Number of strategies (All of the above)
👁️ Click to Reveal
|
| #110 | A game is said to be unfair if is _______. |
✓ Official Answer
Upper and lower values of the game are not equal
👁️ Click to Reveal
|
| #111 | What happens when the maximin and minimax values of the game are equal: _______. |
✓ Official Answer
Saddle point exists
👁️ Click to Reveal
|
| #112 | A mixed strategy game can be solved by is _______. |
✓ Official Answer
Arithmetic method / Graphical method / Dominance method (All of the above)
👁️ Click to Reveal
|
| #113 | The size of the payoff matrix of a game can be reduced by using the principle of is _______. |
✓ Official Answer
Dominance
👁️ Click to Reveal
|
| #114 | The payoff value for which each player in a game always selects the same strategy is called the is _______. |
✓ Official Answer
Saddle point
👁️ Click to Reveal
|
| #115 | Games which involve more than two players are called is _______. |
✓ Official Answer
N person game
👁️ Click to Reveal
|
| #116 | Which of the following is first step for performing Simulation analysis: _______. |
✓ Official Answer
Prepare a problem statement.
👁️ Click to Reveal
|
| #117 | Which of the following are the advantages of using Modelling and Simulation: _______. |
✓ Official Answer
Easy to understand. / Easy to test. / Easy to upgrade. (All of the above)
👁️ Click to Reveal
|
| #118 | Which one of the following is not an application area of Modelling and Simulation: _______. |
✓ Official Answer
Food industry
👁️ Click to Reveal
|
| #119 | Which of the following is the first step for developing the Simulation Model: _______. |
✓ Official Answer
Identify the problem.
👁️ Click to Reveal
|
| #120 | Simulation is the process of using a model to study the performance of a system: _______. |
✓ Official Answer
Agreeable
👁️ Click to Reveal
|
| #121 | Disadvantage of using Modelling and Simulation lies in the statement –: _______. |
✓ Official Answer
Simulation requires manpower and it is a time consuming process. / Simulation results are difficult to translate and only experts can understand it. / Simulation is an expensive process. (All of the above)
👁️ Click to Reveal
|
| #122 | Monte Carlo Simulation gets its name from which of the following: _______. |
✓ Official Answer
Random number assignment
👁️ Click to Reveal
|
| #123 | Select the valid reasons for using Simulation: _______. |
✓ Official Answer
Relationship between the variables is non- linear. OR Optimized solutions are obtained.
👁️ Click to Reveal
|
| #124 | The drive up window of a fast food centre was being studied using simulation for a variety of operating characteristics. As part of the study data was collected on Customer Arrivals as given in the following table. Using expected value calculations determine the expected time between customer arrivals.Inter arrival time (Minutes) 0.5 1.0 2.0 3.0 4.0 5.0 6.0 Probability 0.10 0.25 0.20 0.30 0.05 0.05 0.05: _______. |
✓ Official Answer
2.35 minutes
👁️ Click to Reveal
|
| #125 | Critical Activities have is _______. |
✓ Official Answer
Zero float
👁️ Click to Reveal
|
| #126 | In PERT Chart, the Activity time distribution is -: _______. |
✓ Official Answer
Beta
👁️ Click to Reveal
|
| #127 | A PERT Network has nine activities on its Critical Path. The Standard Deviation of each activity on the Critical Path is 3. The S. D of the Critical Path is –: _______. |
✓ Official Answer
9
👁️ Click to Reveal
|
| #128 | For an activity the pessimistic, most likely and optimistic times are respectively 10, 6 and 2 days. The expected duration of the activity is –: _______. |
✓ Official Answer
6 days
👁️ Click to Reveal
|
| #129 | The time by which the activity completion time can be delayed without affecting the start of the succeeding activities is known as –: _______. |
✓ Official Answer
Free float
👁️ Click to Reveal
|
| #130 | Which of the following statement is not true: _______. |
✓ Official Answer
PERT is deterministic in nature. / CPM is probabilistic in nature. / PERT Network can not be crashed. (All of the above)
👁️ Click to Reveal
|
| #131 | Following data refers to a project Network. What will be the Critical Path? Activity 1 – 2, 2 – 3 ,3 – 4, 1 – 4, 2 – 5, 3 – 5, 4 – 5 Duration 2 Days, 1 Day, 3 Days, 3 Days, 3 Days, 2 Days, 4 Days: _______. |
✓ Official Answer
1 – 2 – 3 – 4 – 5
👁️ Click to Reveal
|
| #132 | The amount of time by which an activity can be delayed without affecting the project completion is called –: _______. |
✓ Official Answer
Total float
👁️ Click to Reveal
|
| #133 | Optimistic time and pessimistic time of an activity are respectively 4 days and 16 days. Variance of the duration of the activity will be –: _______. |
✓ Official Answer
4 days
👁️ Click to Reveal
|
| #134 | In a project planning Free float can affect which of the following: _______. |
✓ Official Answer
Preceding activity
👁️ Click to Reveal
|
| #135 | Solution of problems of Crashing has to be started by applying the technique on –: _______. |
✓ Official Answer
Critical activities.
👁️ Click to Reveal
|
| #136 | A PERT activity has an optimistic time of 3 days, pessimistic time of 15 days and an expected time of 7 days. What is the most likely time of the activity: _______. |
✓ Official Answer
6 days
👁️ Click to Reveal
|
| #137 | The reduction in project time normally results in –: _______. |
✓ Official Answer
Increase in Direct Cost and decrease in Indirect Cost
👁️ Click to Reveal
|
| #138 | The Normal duration and Normal cost of an activity are 10 days and Rs. 350 respectively. The cost slope is Rs. 75 per day. If the Crash duration is 8 days then what is the Crash cost of the activity: _______. |
✓ Official Answer
Rs. 500/-
👁️ Click to Reveal
|
| #139 | Which of the following is incorrect: _______. |
✓ Official Answer
Both PERT and CPM are event oriented.
👁️ Click to Reveal
|
| #140 | The activity that must be completed prior to the start of an activity is called –: _______. |
✓ Official Answer
Predecessor activity
👁️ Click to Reveal
|
| #141 | The slack times of Tail and Head events of Activity P are 10 days and 4 days respectively. If the Free float of the Activity P is 12 days then the Total float would be –: _______. |
✓ Official Answer
16 days
👁️ Click to Reveal
|
| #142 | Which of the following represents reduction in project duration: _______. |
✓ Official Answer
Crashing
👁️ Click to Reveal
|
| #143 | Critical Path Method is good for –: _______. |
✓ Official Answer
Large projects only
👁️ Click to Reveal
|
| #144 | The optimum duration is the –: _______. |
✓ Official Answer
One which gives the minimum Total Cost for the completion of the project.
👁️ Click to Reveal
|
| #145 | Which of the following is not a notable challenge while scheduling a project: _______. |
✓ Official Answer
Independent activities
👁️ Click to Reveal
|
| #146 | A critical path is –: _______. |
✓ Official Answer
The longest path
👁️ Click to Reveal
|
| #147 | Activities A, D and F merges at the event 6. If the earliest finish times of A, D and F are respectively 13, 17 and 8 then the earliest time of Event 6 is –: _______. |
✓ Official Answer
17
👁️ Click to Reveal
|
| #148 | A Learning Curve describes is _______. |
✓ Official Answer
The amount of production time per unit as the total number of units produced increases.
👁️ Click to Reveal
|
| #149 | Limitations of the Learning Curve approach include –: _______. |
✓ Official Answer
Learning Curves are applicable when considering a highly automated process.
👁️ Click to Reveal
|
| #150 | Which of the following statements about Learning Curve is incorrect: _______. |
✓ Official Answer
Learning Curves show that the time saved in completing each subsequent unit increases.
👁️ Click to Reveal
|
| #151 | Which of the following is not an application of Learning Curve: _______. |
✓ Official Answer
Learning Curves can be employed in supply chain negotiations.
👁️ Click to Reveal
|
| #152 | Bimal and Kamal are the two industrial workers engaged in doing a similar job. They have different learning rates of 80% and 90% respectively. Times taken to complete their first jobs are respectively 12 and 8 hours. If both continue with the same learning rate then after how many units Bimal will be faster than Kamal: _______. |
✓ Official Answer
11th unit
👁️ Click to Reveal
|
| #153 | How long will it take to produce the fifth unit with 85% learning rate, if the third unit took 13 hours: _______. |
✓ Official Answer
11.5 hours
👁️ Click to Reveal
|
| #154 | When 24 hours is required to produce a condenser of a particular type then the time required to produce the 16th unit with 85% Learning Curve is –: _______. |
✓ Official Answer
Between 12 and 14 hours
👁️ Click to Reveal
|
| #155 | A diesel engine manufacturing company has an order of 4 large engines. A crew of 16 members took 4000 hours to assemble the first engine. If 80% Learning Curve is used then what will be the labour cost of the fourth engine, assuming average labour rate to be Rs. 180 per hour: _______. |
✓ Official Answer
Between Rs. 4.5 to 5 Lakhs
👁️ Click to Reveal
|
| #156 | Optimization is the method of finding is _______. |
✓ Official Answer
The maximum point / The minimum point / The critical point (All of the above)
👁️ Click to Reveal
|
| #157 | Choose the correct answer is _______. |
✓ Official Answer
Optimization problems should have only one objective function
👁️ Click to Reveal
|
| #158 | The process of finding relative maximum or minimum of a function is known as is _______. |
✓ Official Answer
Optimization
👁️ Click to Reveal
|
| #159 | For a Cost Function TC = 3 𝑄 2+ 7Q + 12, MC is –: _______. |
✓ Official Answer
6Q + 7
👁️ Click to Reveal
|
| #160 | MR is is _______. |
✓ Official Answer
First order derivative of TR
👁️ Click to Reveal
|
| #161 | In the expression D = AC – B2 used for describing the sufficient conditions for unconstrained optimization involving two variables (x and t), the meaning of A and C are –: _______. |
✓ Official Answer
2nd order partial derivative of the objective function (f) with respect to x and y respectively.
👁️ Click to Reveal
|
| #162 | A price discriminating Monopolist Firm operates in –: _______. |
✓ Official Answer
Such a Market where it is the sole supplier. / More than one Market / Markets where it sells same product but in different prices. (All of the above)
👁️ Click to Reveal
|
| #163 | For a dual plant Monopolist Firm with respective production costs C1 & C2 in the two plants, the necessary condition of equilibrium is is _______. |
✓ Official Answer
MC1= MC2= MR
👁️ Click to Reveal
|
| #164 | In Exponential Smoothing Method which one of the following is true: _______. |
✓ Official Answer
0 ≤ α ≤ 1 and high value of α is used for unstable demand.
👁️ Click to Reveal
|
| #165 | Which of the following is not a Casual Forecasting Method: _______. |
✓ Official Answer
Trend adjusted Exponential Smoothing
👁️ Click to Reveal
|
| #166 | In a Time Series forecasting model, the demands for five time periods are 10, 13, 15, 18 and 22. A linear regression fit resulted in the equation y = 6.9 + 2.9t, where y is the forecast for the period t. The sum of the absolute deviations for the five data with respect to their corresponding forecasts (taking t = 1 for the first one) is;: _______. |
✓ Official Answer
2.2
👁️ Click to Reveal
|
| #167 | Which of the following is not a forecasting technique: _______. |
✓ Official Answer
Hungarian Method
👁️ Click to Reveal
|
| #168 | In Simple Exponential Smoothing forecast, to give higher weightage to recent demand information, the smoothing constant must be close to –: _______. |
✓ Official Answer
1
👁️ Click to Reveal
|
| #169 | A linear Trend equation has the form –: _______. |
✓ Official Answer
F = a + bt
👁️ Click to Reveal
|
| #170 | The actual demand for a period is 100 units. But forecast demand was 90 units. The forecast error is –: _______. |
✓ Official Answer
10
👁️ Click to Reveal
|
| #171 | If the estimate of the Trend Component is 158.2, the estimate of Seasonal Component is 94%, the estimate of the Cyclical Component is 105% and the estimate of the Irregular Component is 98%, then the multiplicative model will produce a forecast of –: _______. |
✓ Official Answer
153.02
👁️ Click to Reveal
|
| #172 | Which of the following is not true for forecasting: _______. |
✓ Official Answer
Short range forecasts are less accurate than long range forecasts
👁️ Click to Reveal
|
| #173 | Delphi Method is used for –: _______. |
✓ Official Answer
Judgemental forecast
👁️ Click to Reveal
|
| #174 | Tableau is a –: _______. |
✓ Official Answer
Business Intelligence Tool OR Visualisation Tool
👁️ Click to Reveal
|
| #175 | Which of the following statement is correct: _______. |
✓ Official Answer
For Data Analytics the purpose of ETL Tool is same as that of ELT Tool.
👁️ Click to Reveal
|
| #176 | Which of the following statement is incorrect: _______. |
✓ Official Answer
None of the above (NOT: Microsoft Excel is most popular among all the available spreadsheets. / Zoho Analytics is a tool used for Financial Data analysis. / Visualisation Tools are the Reporting Tools.)
👁️ Click to Reveal
|
| #177 | Prescriptive Analytics is very important because –: _______. |
✓ Official Answer
It tells about the action to be taken.
👁️ Click to Reveal
|
| #178 | Which of the following has no relation to Business Intelligence: _______. |
✓ Official Answer
ABS Glue is a tool used for the purpose of Business Intelligence.
👁️ Click to Reveal
|
| #179 | Which of the following is related to Financial Data Analytics: _______. |
✓ Official Answer
Value driver analytics / Financial ratio analytics / Predictive sales analysis (All of the above)
👁️ Click to Reveal
|
| #180 | Analysis of a dataset has revealed the fact that profit of a business has reduced for the financial year 2021-22. What category of data analytics it comes under: _______. |
✓ Official Answer
Descriptive Analytics
👁️ Click to Reveal
|
| #181 | #Script Ends – is related to which type of programming language: _______. |
✓ Official Answer
Python
👁️ Click to Reveal
|
| #182 | Which one of the following is a Key feature of SAS language: _______. |
✓ Official Answer
Capability of handling data analysis related to Operations Research and Project Management. / Capability of report formation with perfect graphs. / Capability to interact with multiple host systems (All of the above)
👁️ Click to Reveal
|
| #183 | Which one of the following is not a spreadsheet: _______. |
✓ Official Answer
E-views
👁️ Click to Reveal
|
| #184 | ABC Company uses a throughput accounting system. The details of product X per unit are as follows Selling Price - Rs. 40 Material cost- Rs. 12, Conversion Cost -Rs. 18, Time on bottle neck resource - 7 Minutes. The return per hour for product X is is _______. |
✓ Official Answer
₹ 240
👁️ Click to Reveal
|
| #185 | The break-even point of a manufacturing company is Rs.2,50,000. Fixed cost is Rs.50,000. Variable cost is Rs.14 per unit. The PV ratio will be is _______. |
✓ Official Answer
20.00%
👁️ Click to Reveal
|
| #186 | Which of the following is not a method of transfer pricing: _______. |
✓ Official Answer
Internal price transfer price
👁️ Click to Reveal
|
| #187 | Total fixed overhead variance can be defined as _______. |
✓ Official Answer
Amount of the under-applied or over- applied fixed overhead costs
👁️ Click to Reveal
|
| #188 | A company has the capacity of production of 80000 units and presently it sells 20000 units at Rs. 100 each. The demand is sensitive to selling price and it has been observed that every reduction of Rs. 10 in selling price the demand is doubled. What should be the target cost at full capacity it profit margin on sales is taken at 25%: _______. |
✓ Official Answer
Rs.48 lakhs
👁️ Click to Reveal
|
| #189 | The information relating to the direct material cost of a company is as follows: Standard price per unit Rs. 7.20 Actual quantity purchased in units 1600 Standard quantity allowed for actual production in units 1450 Material price variance on purchase (Favourable) Rs. 480 What is the actual purchase price per unit: _______. |
✓ Official Answer
Rs.6.9
👁️ Click to Reveal
|
| #190 | Cost driver means _______. |
✓ Official Answer
An activity which generates costs
👁️ Click to Reveal
|
| #191 | The profit volume ratio of DEF Ltd. is 30%, while the margin of safety is 40%. If fixed cost of the company is Rs. 1,80,000, what will be its profit (net): _______. |
✓ Official Answer
Rs.120000
👁️ Click to Reveal
|
| #192 | The following figures are extracted from the books of a company: Budgeted O/H Rs. 10,000 (Fixed Rs. 6,000, Variable Rs. 4,000) Budgeted Hours 2000 Actual O/H Rs. 10,400 (Fixed Rs. 6,100, Variable Rs. 4,300) Actual Hours 2100 Variable O/H cost variance and Fixed O/H cost variance will be is _______. |
✓ Official Answer
100 (A) and 200 (F)
👁️ Click to Reveal
|
| #193 | Which of the following is not a benefit of Activity Based Costing: _______. |
✓ Official Answer
Prime cost reduction
👁️ Click to Reveal
|
| #194 | The P/V ratio of a firm is 50% and the margin of safety is 40%. BEP of the firm at a sales volume of Rs. 50,00,000 will be: _______. |
✓ Official Answer
Rs.3000000
👁️ Click to Reveal
|
| #195 | ABC Limited has current PBIT of Rs. 19.20 lakhs on total assets of ₹96 lakhs. The company has decided to increase assets by Rs. 24 lakhs, which is expected to increase the operating profit before depreciation by Rs. 8.40 lakhs. There will be a net increase in depreciation by Rs. 4.80 lakhs. This will result in ROI: _______. |
✓ Official Answer
to decrease by 1%
👁️ Click to Reveal
|
| #196 | ABC Limited is facing downfall in its demand. Marketing team has suggested to reduce the selling price by 10% to compete in the market. Variable cost is 72% of the current selling price. What will be the P/V Ratio after reducing the price by 10%: _______. |
✓ Official Answer
20%
👁️ Click to Reveal
|
| #197 | For a Learning Curve percentage of 72%, the time to be taken to complete the 4th unit of a 12-unit job involved in the assembly line, if the initial unit requires 80 hours, will be: _______. |
✓ Official Answer
41.47 hrs
👁️ Click to Reveal
|
| #198 | Marketing department of an organisation estimates that 60,000 of new mixers could be sold annually at a price of Rs. 70 each. To design, develop and produce these new mixers an investment of Rs. 40,00,000 would be required. The company desires a 15% return on investment (ROI). Given these data, the target cost to manufacture, sell, distribute and service one mixer will be: _______. |
✓ Official Answer
Rs.60
👁️ Click to Reveal
|
| #199 | When you wait until the manufacture of a product has been completed and then record all of the related issuances of inventory from stock that were required to create the product, it is called _______. |
✓ Official Answer
Back-flush Accounting
👁️ Click to Reveal
|
| #200 | XYZ Ltd. Plans to introduce a new product and issuing the target cost approach. Projected sales revenue is Rs. 80,00,000 (Rs. 50 per unit) and target costs are Rs. 56,00,000. What is the desired profit per unit: _______. |
✓ Official Answer
Rs. 15
👁️ Click to Reveal
|
| #201 | Assignment Problem can obtain a optimal solution only if -: _______. |
✓ Official Answer
None of the above (NOT: Each row and column has only one zero element / Each row and column has at least one zero element)
👁️ Click to Reveal
|
| #202 | A company uses traditional standard costing system. The inspection and set- up costs are actually Rs. 1,760 against a budget of Rs. 2,000. ABC system is being implemented and accordingly the number of batches is identified as the cost driver for inspection and set up. The budgeted production is 10,000 units in batches of 1,000 units whereas actually 9,000 units were produced in 11 batches. The cost per batch under ABC system will be: _______. |
✓ Official Answer
Rs.200
👁️ Click to Reveal
|
| #203 | A company has the capacity of production of 80,000 units and presently sells 20,000 units at Rs. 100 each. The demand is sensitive to selling price and it has been observed that with every reduction of Rs. 10 in selling price the demand is doubled. What should be the target cost at full capacity if profit margin on sale is taken as 25%: _______. |
✓ Official Answer
Rs.60
👁️ Click to Reveal
|
| #204 | In Simple Exponential Smoothing forecast to give higher weightage to recent demand information, the smoothing constant must be close to: _______. |
✓ Official Answer
1
👁️ Click to Reveal
|
| #205 | Children's Park in a city with various signals and crossing is the simulated model of city traffic. This is a type of: _______. |
✓ Official Answer
Analogue Simulation
👁️ Click to Reveal
|
| #206 | When Backflush costing is most likely to be used: _______. |
✓ Official Answer
A Just-in-Time inventory philosophy has been adopted
👁️ Click to Reveal
|
| #207 | Optimistic and pessimistic time of an activity respectively are 4 days and 16 days. Variance of the duration of the activity will be is _______. |
✓ Official Answer
4 days
👁️ Click to Reveal
|
| #208 | Preparation and use of standard cost, their comparison with actual costs and the measurement and analysis of variances to originating causes is defined as is _______. |
✓ Official Answer
Standard Costing
👁️ Click to Reveal
|
| #209 | A company determines its selling price by marking up variable costs 60%. In addition, the company uses frequent selling price mark down to stimulate sales. If the mark down average 10%, what is the company’s contribution margin ratio: _______. |
✓ Official Answer
30.60%
👁️ Click to Reveal
|
| #210 | A Ltd. Has earned net profit of Rs. 1 lakh, and its overall P/V ratio and margin of safety are 25% and 50% respectively. Find the total fixed cost of the company: _______. |
✓ Official Answer
Rs.100000
👁️ Click to Reveal
|
| #211 | The normal duration and normal cost of an activity of project XYZ are 12 days and Rs. 400 respectively. The cost slope is Rs. 80 per day, if the crash cost of the activity is Rs. 560, what will be the crash duration of the activity: _______. |
✓ Official Answer
10 days
👁️ Click to Reveal
|
| #212 | XYZ Ltd., a manufacturing company has developed a new product and just completed the manufacture of first 16 units of the product. If the first unit took 6 hours to manufacture and the first 16 units together took 62.9856 hours to produce, the Learning Curve (LC) rate would be: _______. |
✓ Official Answer
90%
👁️ Click to Reveal
|
| #213 | If the time taken to produce the first unit of a product is 4000 hrs, what will be the total time taken to produce the 5th to 8th unit of the product, when a 90% learning curve applies: _______. |
✓ Official Answer
10,368 hours
👁️ Click to Reveal
|
| #214 | A company makes a single product which it sells at Rs. 10 per unit. Fixed costs are Rs. 48,000 per month and the product has a contribution to sales ratio of 40%. In a period when actual sales were Rs. 1,40,000, the company's margin of safety in units was is _______. |
✓ Official Answer
2000
👁️ Click to Reveal
|
| #215 | The following tasks are associated with ABC system: (I). Allocation of costs to products (II). Identification of cost pools (III). Identification of cost drivers (IV). Calculation of pool rates. The proper order of the preceding tasks is is _______. |
✓ Official Answer
III, II, IV, I
👁️ Click to Reveal
|
| #216 | A company has forecast sales and cost of sales for the coming year as Rs. 25 lakhs and Rs. 18 lakhs respectively. The inventory turnover has been taken as 9 times per year. In case the inventory turnover increases to 12 times and the short term interest rate on working capital is taken as 10%, what will be saving in cost: _______. |
✓ Official Answer
Rs.5000
👁️ Click to Reveal
|
| #217 | Which of the following would decrease unit contribution margin the most: _______. |
✓ Official Answer
15% decrease in selling price
👁️ Click to Reveal
|
| #218 | Which of the following is a Forecasting technique: _______. |
✓ Official Answer
Exponential Smoothing
👁️ Click to Reveal
|
| #219 | A company produces two joint products, P and V. In a year, further processing costs beyond split-off point spent were Rs. 8,000 and Rs. 12,000 for 800 units of P and 400 units of V respectively. P sells at Rs. 25 and V sells at Rs. 50 per unit. A sum of Rs. 9,000 of joint cost were allocated to product P based on the net realization method. What were the total joint cost in the year: _______. |
✓ Official Answer
Rs.15000
👁️ Click to Reveal
|
| #220 | Nulook Ltd. Uses a JIT system and back flush accounting. It does not use a raw material stock control account During May, 8000 units were produced and sold. The standard cost per unit is Rs. 100; this includes materials of Rs. 45. During May, Rs. 4,80,000 of conversion costs were incurred. The debit balance on cost of goods sold account for May was: _______. |
✓ Official Answer
Rs.840000
👁️ Click to Reveal
|
| #221 | A factory of ABC Ltd. has a key resource (bottleneck) of a facility D which is available for 48000 minutes per week. The time taken per unit of product P in facility A is 6 minutes. Last week's actual output was 5000 units of product P and actual factory cost (excluding material cost) was Rs. 1,20,000. What is throughput cost per week: _______. |
✓ Official Answer
Rs.75000
👁️ Click to Reveal
|
| #222 | In a PERT network, the optimistic time for a particular activity is 9 weeks and the pessimistic time is 21 weeks. Which one of the following is the best estimate of the standard deviation for the activity: _______. |
✓ Official Answer
2
👁️ Click to Reveal
|
| #223 | What is the opportunity cost of making a component part in a factory given no alternative use of the capacity: _______. |
✓ Official Answer
Zero
👁️ Click to Reveal
|
| #224 | The particular task performance in CPM is known as _______. |
✓ Official Answer
Activity
👁️ Click to Reveal
|
| #225 | In calculating the life cycle costs of a product, which of the following items would be included? A. Planning and concept design costs B. Preliminary and detailed design costs C. Testing costs D. Production costs E. Distribution costs: _______. |
✓ Official Answer
D and E / B, D and E / D (All of the above)
👁️ Click to Reveal
|
| #226 | The expected time for an activity of Project B is 10 days. If the optimistic and pessimistic times are 8 days and 12 days respectively, the most likely time estimate will be is _______. |
✓ Official Answer
10 days
👁️ Click to Reveal
|
| #227 | XYZ Ltd., developing a new product, makes a model for testing and goes for regular production. From past experience of similar models, it is known that a 90% learning curve applies. If the time taken to make the model is 300 hours, what will be the total time taken to produce 3rd to 4th unit of the product: _______. |
✓ Official Answer
432 hours
👁️ Click to Reveal
|
| #228 | Activity in a Network diagram is shown by: _______. |
✓ Official Answer
Arrow
👁️ Click to Reveal
|
| #229 | Which of the following quality costs is incurred when inferior products are delivered to customers: _______. |
✓ Official Answer
External Failure Costs
👁️ Click to Reveal
|
| #230 | During which phase of the Product Life Cycle, sales rise at an increasing rate: _______. |
✓ Official Answer
Growth
👁️ Click to Reveal
|
| #231 | A company has 2000 units of an obsolete item which are carried in inventory at the original purchase price of Rs. 30,000. If these items are reworked for Rs. 10,000, they can be sold for Rs. 18,000. Alternatively, they can be sold as scrap for Rs. 3,000 in the market. In a decision model used to analyze the reworking proposal, the opportunity cost should be taken as is _______. |
✓ Official Answer
Rs.3000
👁️ Click to Reveal
|
| #232 | When fewer than m+n-1 shipment exist in a feasible solution: _______. |
✓ Official Answer
an occupied cell must be created artificially.
👁️ Click to Reveal
|
| #233 | When allocation service department cost to production departments, the method that does not consider different cost behavior patterns is the: _______. |
✓ Official Answer
Single rate-method
👁️ Click to Reveal
|
| #234 | Which one of the following is not a support activity of value chain: _______. |
✓ Official Answer
Service
👁️ Click to Reveal
|
| #235 | In a factory where standard costing system is followed the production department consumed 1100 kgs of a material @ Rs. 8 per kg for product X resulting in material price variance of Rs. 2200(Fav) and material usage variance of Rs. 1000(Adv).What is the standard material cost of actual production of product X: _______. |
✓ Official Answer
Rs.10000
👁️ Click to Reveal
|
| #236 | Which of the following is a recognised method of arriving at the selling price for the products of a business? (A) Life cycle pricing (B) Price skimming (C) Penetration pricing (D) Target costing: _______. |
✓ Official Answer
(A), (B) and (C) only
👁️ Click to Reveal
|
| #237 | Warranty period return of finished goods sold falls under the following quality cost is _______. |
✓ Official Answer
Internal failure
👁️ Click to Reveal
|
| #238 | P operates an activity based costing (ABC) system to attribute its overhead costs to cost objects. In its budget for the year ending 31August 2017, the company expected to place a total of 2,895 purchase orders at a total cost of Rs. 1,10,010. This activity and its related costs were budgeted to occur at a constant rate throughout the budget year, which is divided into 13 four- week periods. During the four-week period ended 30 June 2016, a total of 210 purchase orders were placed at a cost of Rs. 7,650. The over-recovery of these costs for the four-week period was is _______. |
✓ Official Answer
Rs.330
👁️ Click to Reveal
|
| #239 | Which one of the following is not true for a Red ocean strategy and why: _______. |
✓ Official Answer
Break the value cost trade-off
👁️ Click to Reveal
|
| #240 | Mohan Ltd., has developed a new product just complete the manufacture of first four units of the product. The fist unit took 2 hours to manufacture and the first four units together took 5.12 hours to produce. The Learning Curve rate is _______. |
✓ Official Answer
80.00%
👁️ Click to Reveal
|
| #241 | A company has a capacity to make 4,00,000 units of a product. It has noted from market conditions that at a price of Rs. 50 per unit, it can sell 1,00,000 units but the demand would double for each Rs. 5 fall in the selling price. A minimum margin of 25% is required. The target cost for the company should be is _______. |
✓ Official Answer
Rs.30
👁️ Click to Reveal
|
| #242 | Maximising player in a Payoff Matrix always uses: _______. |
✓ Official Answer
Second strategy
👁️ Click to Reveal
|
| #243 | SINT Ltd. determine its selling price by marking up the variable cost 50%. In addition, the company uses frequent selling price mark down to stimulate sales. If the mark down average is 20%, what is the company's contribution margin Ratio: _______. |
✓ Official Answer
16.67%
👁️ Click to Reveal
|
| #244 | Subham Ltd., has the capacity of production of 80,000 units and presently sells 20,000 units at ₹100 each. The demand is sensitive to selling price and it has been observed that with every reduction of ₹10 in selling price, the demand is doubled. What should be the target cost at full capacity if profit margin on sale is taken as 25%: _______. |
✓ Official Answer
Rs.60
👁️ Click to Reveal
|
| #245 | A Company requires ₹85,00,000 in sales to meet its target net profit. Its contribution margin is 30% and the fixed costs are Rs.15,00,000. What is the target net profit: _______. |
✓ Official Answer
Rs.1050000
👁️ Click to Reveal
|
| #246 | Depreciation of product testing equipment is _______. |
✓ Official Answer
Appraisal Cost
👁️ Click to Reveal
|
| #247 | The P/V ratio of a company dealing in Mechanical equipment is 50% and the margin of safety is 20%. BEP of the firm at a sales volume of Rs.50,00,000 will be: _______. |
✓ Official Answer
Rs.4000000
👁️ Click to Reveal
|
| #248 | ABC Ltd., a manufacturing company has a break-even point when sales are Rs.12,00,000 and fixed costs at that level of sales are Rs. 4,80,000. If the margin of safety (MOS) and sales of the company are 40% and 5,00,000 units respectively, what will be the sale price per unit: _______. |
✓ Official Answer
Rs.4
👁️ Click to Reveal
|
| #249 | Random numbers are used: _______. |
✓ Official Answer
To describe the uncertainty of the input values
👁️ Click to Reveal
|
| #250 | In a factory where standard costing system is followed, the production department consumed 1100 kgs of a material @ Rs.8 per kg for product X resulting in material price variance of Rs.2200 (Fav) and material usage variance of Rs.1000 (Adv). What is the standard material cost of actual production of product X: _______. |
✓ Official Answer
10,000
👁️ Click to Reveal
|
| #251 | When Minimax and Maximin criteria matches then: _______. |
✓ Official Answer
Saddle point exists
👁️ Click to Reveal
|
| #252 | A Firm is said to achieve Condition of equilibrium when: _______. |
✓ Official Answer
Its loss is minimized / Its objective is optimized / Its profit is maximized (All of the above)
👁️ Click to Reveal
|
| #253 | An operation has a 90% learning curve and the first unit produced took 28 minutes. The labour cost is Rs.20 per hour. How much should the second unit cost: _______. |
✓ Official Answer
Rs.7.6
👁️ Click to Reveal
|
| #254 | The constraints in a linear programming Model are -: _______. |
✓ Official Answer
Scarce Resources
👁️ Click to Reveal
|
| #255 | If project A has a net present value (NPV) of Rs.30,00,000 and project B has an NPV of Rs.50,00,000, what is the opportunity cost if project B is selected: _______. |
✓ Official Answer
Rs.3000000
👁️ Click to Reveal
|
| #256 | To obtain the break-even point in rupee sales value, total fixed costs are divided by: _______. |
✓ Official Answer
Profit/Volume Ratio
👁️ Click to Reveal
|
| #257 | Which of the following Quality Cost is incurred in the process of uncovering defects: _______. |
✓ Official Answer
Appraisal Costs
👁️ Click to Reveal
|
| #258 | A company that is a price-taker would most likely use which of the following methods: _______. |
✓ Official Answer
Target costing
👁️ Click to Reveal
|
| #259 | The Break Even Sales of GXT Ltd., a manufacturing company, is Rs.3,75,000, while its fixed cost is Rs.1,12,500. If the Margin of Safety is 40%, what will be its Profit: _______. |
✓ Official Answer
Rs.75000
👁️ Click to Reveal
|
| #260 | The product of XYZ company is sold at a fixed price of Rs.1,500 per unit. As per company’s estimate, 500 units of the product is expected to be sold in the coming year. If the value of investments of the company is Rs.15 lakh and it has a target ROI of 15%, the target cost would be is _______. |
✓ Official Answer
Rs.1050
👁️ Click to Reveal
|
| #261 | A PERT network has only two activities on its critical Path. The Standard Deviation of these activities are 6 and 8 respectively. What is the Standard Deviation of the Project completion time: _______. |
✓ Official Answer
Rs.10
👁️ Click to Reveal
|
| #262 | A 100% Learning Curve implies that: _______. |
✓ Official Answer
No learning has been achieved
👁️ Click to Reveal
|
| #263 | Analysis of a dataset has revealed the fact that profit of a business has reduced for the financial year 2024-25. What category of data analytics it comes under: _______. |
✓ Official Answer
Descriptive Analytics
👁️ Click to Reveal
|
| #264 | Learning Curve is also known as: _______. |
✓ Official Answer
Experience curve
👁️ Click to Reveal
|
| #265 | PQR Ltd., a manufacturer of components for XYZ, has a capacity to produce 4 Lakh units. The market demand is sensitive to the sale price and the company could sell 1 Lakh units at a price of Rs.5,000 each. The demand thereafter would double for each 500 per unit fall in the selling price. If the company expects a minimum margin of 25%, what would be the Target Cost per unit for the company to sell at full capacity utilization: _______. |
✓ Official Answer
Rs.3000
👁️ Click to Reveal
|
| #266 | In cost-plus pricing, the markup consists of: _______. |
✓ Official Answer
desired ROI
👁️ Click to Reveal
|
| #267 | Which of the following is/are not the features of Jedox tool: _______. |
✓ Official Answer
(B) and (C) only
👁️ Click to Reveal
|
| #268 | A particular job MB requires 800 kgs. of a material. 500 kgs. of the particular material is currently in stock. The original price of the material was Rs.300 but current resale value of the same has been determined as Rs.200. The current replacement price of the material is Re. 0.80 per kg., what will be the relevant cost of material for job MB: _______. |
✓ Official Answer
Rs.440
👁️ Click to Reveal
|
| #269 | What is the name given to a budget that has been prepared by re-evaluating activities and comparing the incremental costs of those activities with their incremental benefits: _______. |
✓ Official Answer
Zero based budget
👁️ Click to Reveal
|
| #270 | 1200 units of microchips are required to be sold to earn a profit of Rs.1,06,000 in a monopoly market. The fixed cost for the period is Rs.74,000. The contribution in the monopoly market is as high as 3/4th of its variable cost. Determine the target selling price per unit: _______. |
✓ Official Answer
Rs.350
👁️ Click to Reveal
|
| #271 | A company produces a product which is sold at a price of Rs.80. Its Variable cost is Rs.32. The company’s Fixed cost is Rs.11,52,000 p.a. The company operates at a margin of safety of 40%. The total sales of the company is is _______. |
✓ Official Answer
40,000 units
👁️ Click to Reveal
|
| #272 | In the context of Critical Path Analysis, the portion of the float of an activity which cannot be consumed without affecting adversely the float of the subsequent activities is called _______. |
✓ Official Answer
Interfering float
👁️ Click to Reveal
|
| #273 | In CPA (Critical Path Analysis) which of the following is not a correct step in sequence: _______. |
✓ Official Answer
Implementing and controlling the net work
👁️ Click to Reveal
|
| #274 | By making and selling 9,000 units of a product, a company makes a profit of Rs.10,000, whereas in the case of 7,000 units, it would lose Rs.10,000 instead. The number of units to break-even is _______. |
✓ Official Answer
8,000 units
👁️ Click to Reveal
|
| #275 | A learning curve is a function: _______. |
✓ Official Answer
that measures the decline in labor-hours per unit due to workers becoming better at a job
👁️ Click to Reveal
|
| #276 | The break-even point of a manufacturing company is Rs.1,60,000. Fixed cost is Rs.48,000. Variable cost is Rs.₹ 12 per unit. The PV ratio will be: _______. |
✓ Official Answer
30%
👁️ Click to Reveal
|
| #277 | A factory has a key resource (bottleneck) of Facility A which is available for 31,300 minutes per week. The time taken by per unit of Product X and Y in Facility A are 5 minutes and 10 minutes respectively. Last week’s actual output was 4750 units of product X and 650 units of Product Y. Actual factory cost was Rs.78,250. The throughput cost for the week would be is _______. |
✓ Official Answer
Rs.75625
👁️ Click to Reveal
|
| #278 | S Ltd. manufactures a product whose time for the first unit is 1000 hours. It experience a learning curve of 80%, What will be the total time taken in hours for unit 5 to 8: _______. |
✓ Official Answer
1536 hours
👁️ Click to Reveal
|
| #279 | M/s Zimbra Limited sold 55,000 units of its product at Rs. 80 per unit. P/V Ratio is 20%. If total Fixed Cost is Rs. 6,40,000, the Margin of Safety (Units) is _______. |
✓ Official Answer
15,000 Units
👁️ Click to Reveal
|
| #280 | Which one of the following is true for Blue Ocean Strategy: _______. |
✓ Official Answer
Make the competition irrelevant
👁️ Click to Reveal
|
| #281 | The important step(s) required for simulation approach in solving a problem is/are: _______. |
✓ Official Answer
Test and validate the Model / Design the experiment / Conduct the experiment (All of the above)
👁️ Click to Reveal
|
| #282 | The expected time for an activity of Project LM is 20 days. If the most likely and pessimistic time are 19 days and 28 days, what will be the variance of the activity: _______. |
✓ Official Answer
4
👁️ Click to Reveal
|
| #283 | Down time due to defect in quality is an example of: _______. |
✓ Official Answer
Internal failure cost
👁️ Click to Reveal
|